Water cutting cutting without thermal deformation, avoid physical and chemical changes of materials; Widely suitable for cutting all kinds of materials, the incision is smooth and smooth without burr, generally without reprocessing; The equipment is controlled by numerical control system with high cutting precision. The cutting joint is less than 1.2mm, which is convenient for nesting cutting and material saving. The process does not produce environmentally polluting waste; Numerical control water knife for those other methods are difficult to cut materials such as aramid, titanium alloy and a variety of composite materials is very ideal processing means.

Equipped with a variable oil pump and an intelligent variable high pressure system composed of four imported valve bodies, which can intelligently adjust the amount of oil according to the pressure requirements and has high cutting efficiency, better oil temperature control and more energy-saving, so that each pressurization is just right

Split structure

The X,Y,Z axis adopts double sealing design, with external high-quality stainless steel brushed shell and high-quality dust-proof folding cloth, which can provide effective hard protection and full sealing for the equipment, and is the most effective sealing form of waterjet cutter at present

Equipped with a variable oil pump and an intelligent variable high pressure system composed of four imported valve bodies

which can intelligently adjust the amount of oil according to the pressure requirements and has high cutting efficiency, better oil temperature control and more energy-saving, so that each pressurization is just right

3 axis waterjet machine 

A high pressure water jet cutting machine is a tool which slices into metal and other materials, using a jet of water at high velocity and pressure. 

Because of its advantages of low noise, no pollution, high precision and good reliability, it has been widely used in mining, automobile, paper-making, 

food, art, construction and other industries.Waterjet can cut almost every thing, including metal,glass,plexiglass,ceramic,marble, granite, 

rubber and compound material etc.

Dynamic 5axis water jet cutting machine

Dynamic 5 axis waterjet cutting machine is specially used to cut marble and granite, 

because it can compensate 10° cutting angle and make the stone patchwork more perfect. It is a kind of bevel cutting machines.

Due to the water jet cutting is a way of flexible cutting, therefore the product cross section will have a certain degree of inclination 

after cutting by the traditional 3 axis water jet cutting machine. In order to ensure the accuracy of vertical cutting section, 

it must reduce the cutting speed. 

However, our 5 axis water jet cutting machine can not only ensure the accuracy of vertical cutting section by compensating the cutting angle, 

but also not reduce the cutting speed.Therefore, it is the best choice to use it to cut mosaic stone, 

which saves the time and manpower for the second polishing of mosaic stone.

Max5 axis waterjet cutting machine

MAX5 series 5 axis water jet cutting machine unlike a conventional 3-axis waterjet cutting machine, 

this product is added with A-axis (in a vertical direction) and C-axis (which rotates around the Z axis).

By using state-of-the-art technology and the Italian ECS control system, 

it can produce 0-±45° inclined cuts with a maximum rotation angle of up to ±540°. 

Currently, this state-of-the-art cutting equipment has been applied by a wide variety of advanced processing industries.

It can cut the product cross section without inclination, and cut bevel at any angle, as well as cut the workpiece vertically, 

especially cut cone, curved impeller, gear, etc. 

Parts Detials

All of them adopt Siemens electronic components. The wiring is simple and practical.

X axis, Y axis using Fully sealed oil bubble type:

The guide screw is completely immersed in the oil tank, which can fully lubricate and prevent the wear of the transmission system from the splashing of abrasive and water. And it has high cutting accuracy, but also greatly improves the service life of the equipment, and solves the serious accuracy attenuation problem of water jet cutter in the past, and the cutting is accurate at any time

Application and advantages

After Services All Machine Life

1.For on site installition and training: the buyers take responsibility for technician’s air-ticket,hotel and food.

2.Free warranty for the machine is one year(except wearing parts and the replacement of wearing parts).

3. Training of personnel as requirement of customer.

4. To guarantee long term supply of spare parts.

5. lifetime service, maintenance.

6. the buyers have the special price when there are new products updating and ne technologies.

7.Quick response time: when the user’s machine any fails,response within 12 hours after receipt of written notice.

   by phone,email or fax.the seller will help buyers solve problem ASAP.

International Shipping

Around the World All the CNC routers can be shipped worldwide by sea, by air or by international express logistics via DHL. FEDEX. UPS. You are welcome to get a free guotation by fling up the form with name, email, detailed address.Product and recuirements. We will shortly contact you with the full information includina the most suitable delivery method fast secure discreet and freight.